Woodpeckers OneTIME Tool TruSquare - Inch
Ships for Free
TruSquarePerhaps the Most Versatile Square Ever MadeMulti-Function TruSquare– The Ultimate Combination Tool. Woodpeckers new TruSquare is unlike any tool you’ve ever seen. It is a combination...
You May Also Like
Perhaps the Most Versatile Square Ever Made
Multi-Function TruSquare– The Ultimate Combination Tool. Woodpeckers new TruSquare is unlike any tool you’ve ever seen. It is a combination square, a speed square, bevel gauge, depth and height gauge, center finder, thickness gauge and more. Oh yeah, it’s also a square! All in, TruSquare, the brainchild of Jonathan Schwartz, a shop teacher and inventor at Colfax High School in Colfax, California, is the ultimate layout and machine setup tool.
How TruSquare Works. Think of TruSquare as a combination square. It has a 90° and 45° angle that travels along a ruler. You already know the benefits of a combination square so let’s move on. The stainless steel triangle travels and pivots (and locks) into a 12” length of aluminum T-track so TruSquare can be used to both find or lay out any angles from 0° to 90°. And for layout work you can quickly flip TruSquare from one edge of the track to the other and quickly layout the compliment angle because the triangle is an isosceles right triangle.
Five Engraved Scales Plus The Magical 1:2 Scale. The TruSquare T-track has three engraved scales in 1/16” increments. Two are on the top edge and one is on the side at the bottom. The triangle has two 1/16” inch engraved scales 7” long on the equal length legs. On these scales, zero aligns with the inside edge of the track. Then there’s the magical 1:2 ratio scale on the bottom of the triangle. This scale is in 1/32” increments and allows you to quickly set the tool to divide any measurement under 7¾” in half. All you do is align the 1:1 (normal) scale on the T-track with the 2:1 scale on the bottom of triangle.
So what, you say? Glad you asked. Using these two scales in combination you can quickly find the center of board. Just extend the T-track across the width of the stock, read the dimension, then turn the tool over and align your reading with the reading on the 2:1 scale. Stock center can now be marked referencing the T-track end.
More Magic, Please. Say you want to lay out a ¾” thick mortise centered exactly in the center of your 2” thick stock. Take the 1¼” difference and align the 1¼” 1:1 scale with the 1¼” 2:1 scale and mark the mortise referencing the end of the T-track. Of course, you can lay out your tenon the same way. This same technique can also be used to center parts during assembly work.
Even More Great Features. The stainless steel triangle is chock-full of additional features. It has two different angle references. The precision laser engraved degree scale on the long edge is only for use as an extended reference to the interior angle scale. The interior degree scale features a series of scalloped detents that lock-in place in 2½° increments and include the most often used angle settings like 15°, 22.5°, 30°, 45°, 60°, 67.5° and 75°." Of course, you may also lock any angle anywhere between 0° and 90°. Just set the pointer to your desired angle and tighten.
The triangle also has small, precision milled diamond shapes at every inch along both short legs. These diamond cutouts assist in layout work to draw one or more precise, repeatable lines by capturing your pencil point in the exact location you desire.
Depth Gauge and Machine Setup. Use TruSquare to check the depth mortises, dados, grooves and more. Just drop the T-track into the joint then lock it in place. Now take your TruSquare measurement to your table saw or router table to set the blade or bit height. Your setup will be spot-on every time.
Pre-Order Now, Don’t Delay!
Your Credit Card will be charged at the time you place the order.
When They’re Gone, They’re Gone! Like all their OneTIME Tools, the TruSquare is only made to order. They’ll make only enough units to fill orders received by the July 24, 2017 deadline. Once orders are filled, the tool will be retired from their product line. Order yours today! Delivery is scheduled for November, 2017. May we make one for you?
Made in U.S.A.
By buying a OneTIME Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.