Woodpeckers - OneTIME Tool Paolini Pocket Rule Aluminum 150mm
Ships for Free
OneTIME Tool – Paolini Pocket Rule This products is the 150mm Paolini Aluminum Pocket Rule OnlyNew, From Woodpeckers®Must Have Paolini Pocket Rules Woodpeckers OneTIME Tool®Choose Either Aluminum...
Item 861213Model WWR300
Item 861214Model WWR600
Item 154073Model SERXL-24
Item 125479Model T-RULE06
Item 125477Model RULE06
Item 125480Model RULE12
Item 861215Model WWR900
This products is the 150mm Paolini Aluminum Pocket Rule Only
New, From Woodpeckers®
Must Have Paolini Pocket Rules
Woodpeckers OneTIME Tool®
Choose Either Aluminum or Stainless Steel Models
Popular Paolini Pocket Rules Back By Popular Demand. With these clever rules you’ll carry reliability and convenience right in your shop apron’s pencil pocket. The full-featured design of our Paolini Pocket Rules are the result of a close collaboration with woodworking pro, Gregory Paolini. You could say it was designed by a woodworker for woodworkers! And after toting it around in your shop apron for a project or two, you’ll wonder how you ever got along without it.
Unlike Any Pocket-Sized Rule You’ve Ever Used. No other small rule has all the built-in features of Woodpeckers’ Paolini Pocket Rule. You may have seen one or two of our features on other rules, but none that have them all. In one small rule you get:
An adjustable rule-stop to guarantee perfectly repeatable layout lines just like using a T-Square.
Vertical end-scales for precisely setting the height of router bits and table saw blades.
The rule stop doubles as a stand to set the rule on edge when using the end-scales leaving both your hands free to make machine adjustments.
An end-notch to precisely position your pencil point for marking out.
And finally, both styles of pocket rules come in either inch or metric scales engraved using state-of-the-art equipment to produce precise marks. We engrave in white on the red, anodized aluminum blades for enhanced visual clarity. We use black annealed marks on the stainless steel blades that will last a lifetime and then some. Our process delivers both the durability of engraving and enhanced visual clarity.
The aluminum blade is 1” wide x 1/8” thick and the stainless steel blade is 1” wide x 1/16” thick. Both sides have scale marks so you’ll never have to read a dimension upside down. On one side you see 1/32” marks along the top edge and 1/16” along the bottom with a 1/32” vertical end-scale. On the opposite side, 1/16” marks are at the top with 1/32” at the bottom. The end scale on this side has 1/16” marks. Metric models use 1mm marks on both sides and end scales.
For woodworkers who prefer rules with both Imperial and metric scales, we have a combination version that features 1/32” and 1mm scales on one side with a 1/32” vertical end scale. On the other side we engrave 1mm and 1/16” scales on the long edges with a 1 mm vertical end scale.
Ordering Options: Single Rules Or Get The Set And Save! Our aluminum and stainless steel Paolini Pocket Rules come in three different lengths with either Imperial or metric scales and the combo Imperial and metric scales model. Choose from 6” or 8” long pocket-sized models or the 12” length that’s ideal for bench work. Metric lengths are 150mm, 200mm or 300mm. You can order any Paolini Pocket Rule length in Imperial or metric scales individually or choose the full set of Imperial or Metric rules in either aluminum or stainless steel and get all three at a savings. The same options apply to the combo Imperial and metric rules.
When They’re Gone, There’re Gone! Like all our OneTIME Tools, the Paolini Pocket Rules are only made to order in a one-time production run. We’ll make enough units to fill pre-orders. Order deadline is February 5, 2018. Once orders are filled, the Pocket Rules will be retired from our product line. Order yours today! Delivery is scheduled for May, 2018.
Like all Woodpeckers OneTime tools, Woodpeckers Paolini Pocket Rules are manufactured using state-of-the-art CNC equipment, operated by highly skilled machinists, in our company’s shop located near Cleveland, Ohio and made in the U.S.A.
Your credit card will be charged when order is placed.
By buying a OneTIME Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.