Festool - Festool 106" Guide Rail FS 2700 / 2
This item has an additional shipping charge
Now you can make dead straight, silky smooth, splinter free cuts in hardwood veneered plywood with a portable circular saw. The secret of course, is the use of a Festool TS 55 or TS 75 EQ circular...
You May Also Like
Item 497657Model 497657
The unique Festool guide rail system is designed for use with Festool products, so adapters are unnecessary. Two soft, grippy, cushion strips underneath the guide rail are strategically located to prevent slippage and splintering. Upon first use, a hard rubber edge strip is trimmed back by the tool so that it precisely indicates the cut line for future work without calculations for base plate offset. Special "C" clamps fit into a slot under the guide rail for obstruction free work when absolute positioning accuracy is required. Made in Germany.
- Hard-anodized surface
- Soft, non-slip coating
- Hard rubber splinter guard
- Mounting slot for: FSW angle unit, 2 FSV connectors, FSZ clamps, FS-AW Deflector
- Festool products can only be sold in the 50 states
Festool FS guide rails are available in several different lengths, providing the right rail for every application.Simply lay the guide rail on the workpiece and line up the splinterguard flush with the scribe line. Now place your Festool circular saw on the guide rail. The guide rib on the rail engages in the guide slot on the tool. You save laborious measurements and obtain perfectly straight and accurate cuts.
Gentle on surfaces - The soft, non-slip coating prevents damage to the workpiece and hold the guide raid securely in place without clamping or taping. Festool guide rails are also equipped with a splinter guard. A rubber lip pressing onto the workpiece along the scribe line ensures splinter-free edges.
Zero lateral play adjustment - The guide slot can be adjusted precisely to the dimensions of the guide rib. All guide rails will thus fit any Festool saw.