Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
Our 1-1/2" Kunikei Hand Hammered Paring Chisel is made by the Samurai blacksmith Yoshiro Ikeda (see below for family history). To form the blade, he hand forges the best quality Yasuki high carbon white steel to a backing of soft low carbon steel. Like old time chisels, all of the shaping is done with the hammer and marks are left on the blade. Rather than using a power grinder, Mr. Ikeda hollows the back of the blade using a special hand file called a Soto Sen. This is exacting work, and only one other chisel maker uses this technique. But the benefits are easier sharpening and longer lasting chisels. Each chisel then goes through a rigorous tempering process and is hardened to Rockwell C64-65. Mr. Ikeda personally hand sharpens each blade to a razor like edge. The handles are made from best quality Japanese Red Oak, Hon Akagashi. Blade length is 3½" and overall length is 13¼"
by Japan Woodworker